Halo Pool Vacuum Manual pool vac & water feature vac battery powered with its own filter bag. Kaltech are the European agents for the Halo Pool Vac.  The Halo Pool vacuum is a manual commercial swimming pool vac which is designed for cleaning any size or shape  swimming pool.  This machine is also used for cleaning water features, fountains and power station basins. This machine uses a powerful  submersible pump which pumps 12,000 gallons of water per hour. The pump is powered by a 12 volt battery which stays on the pool side with the machine operator.  The dirt and debris is collected in the on board filter bag, which is mounted just above the motor for maximum suction. The Halo pool cleaner is the ideal pool vac for pools that do not have a suction point to connect a standard pool vac to, or where the dirt and debris needs to be collected in a separate filter bag to avoid blocking up the pool filtration system. As with all pool cleaners that are independent of the filtration system, the Halo pool vac will save on pool chemicals and heating costs as there is no back washing required after the clean.  When a pool is cleaned with a conventional pool cleaner, the dirt and debris are taken back to the filter.  The filter then needs to have this dirt washed out by reversing the flow of water and sending it to waste, which obviously wastes both the heated water and chemicals.   Halo Pool Vacuum For any further information please contact us below: Contact Us Delivery Home Telephone:   01684 830159 E-mail:   sales@kal-tech.co.uk The Halo Pool Vacuum in use in the Trafalgar Square fountains