Hammer Head Pool Vacuum The Hammer Head manual pool vac. Suitable for all shape and size  pools, water features or commercial applications. The Hammer Head manual pool vac is the choice for managers at water parks, hotels, water features and even the military. The Hammer Head is a manual pool vacuum that collects all its dirt and debris to an on board filter bag.  It is powered by a 12V battery which sits on the side of the pool.  It is very quick and esy to set up as there are no hoses to connect up and prime, no valves to open and no filter to back wash after cleaning. The Hammer Head-30 pool vacuum is ideal where there is a large area of water any size or shape that needs cleaning . Robotic pool cleaners are great, but there are certain situations where they are not suitable.  Most robotic pool cleaners will operate to a maximum depth of 4.5M, they will have minimum and maximum operating temperatures and will not be suitable for use in a pure sea salt water pool.  The Hammer Head pool cleaner will be ideal in all these situations. The Hammer Head-30 is equipped with a 30” wide vacuum head, which makes cleaning large areas of water very quick. If your pool has a lazy river or hard to reach areas that an automatic pool cleaner may find difficult, then the Hammer Head manual pool cleaner may be the answer.   Please note: The cart is not included with this machine Suction Head Width Cable Length Exhaust Channel 16,000 GPH 81.3cm/32” 18.5m/60ft 20.5cm/8” Hammer Head Specificatons Please call if you would like a free demo of the Hammer Head pool vacuum Hammer Head Pool Vacuum If you require any further information then please contact us below: Contact Us Telephone:   01684 830159 E-mail:   sales@kal-tech.co.uk